Main Discussion Area > HowTo's and Build-a-longs
Updated Tillering Gizmo instructions with pictures.
Pat B:
I also use the Gizmo to help adjust twists by running it down either side of the belly. it will show you where each side is bending and where it is not bending.
xin:
Thanks for posting the tutorial on the gizmo. I've been meaning to make one of the things by trial and error for years and have never gotten around to it. Now I have no excuse with your very explicit instructions. Thanks again.
Morgan:
I've been Hoping for a new post on this!! Does this only work on stiff handled bows? Or will it work on D bows as well? Also if you have a pretty wonkey that has some jumps and dips will it work, or is it better suited for straight staves?
Knoll:
--- Quote from: Pat B on September 03, 2017, 12:28:15 pm ---I also use the Gizmo to help adjust twists by running it down either side of the belly. it will show you where each side is bending and where it is not bending.
--- End quote ---
Hmmmm ... sounds like good idea. Thanks!
Eric Krewson:
It works on any bow that has a flat limb configuration. It wouldn't work on one with a lot of roller coaster dips and humps in the limb.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version