Main Discussion Area > Horn Bows
First attempt build a long !
Stick Bender:
End result !
DC:
I'm a little anxious to see how it comes off that carpet tape. That stuff is pretty tough.
Stick Bender:
No problem Don I just heat up the fade end a bit and put a knife blade under it and a little pressure as you go , yes your right this FG reinforced tape is brutally strong stuff there is a little residue left on the horn but will clean right up great stuff used it for all kinds of stuff !
DC:
Glad to see that. Carry on!
Stick Bender:
After taking them off the feed tables ended up at a little under 3 1/2 mm,9/64 so Im ok on thickness the shortest usable length is 17 in. ,both horns are with in 1/1000 on thickness of each other the 9/64 being the thinest the plan calls for 1/8 thickness so Im good on thickness ! But I ether need to prep another horn for a butt exstention or prep other horns , I think Im going for the 2 1/2 in.butt exstention and save the longer horns for another bow !
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version