« previous next »
Pages: [1]

Author Topic: How do I make one of these?  (Read 2981 times)

0 Members and 1 Guest are viewing this topic.

Offline Ryan Jacob

  • Member
  • Posts: 427
How do I make one of these?
« on: December 10, 2017, 04:27:07 am »
I recently went to my uncles house and this caught my interest.



How do I make a better one of these for myself and what are they used for? When I asked him he said
“either a tool or a weapon”. Also, what type of shell do you think this is from? It’s pretty thick and has a pretty good edge. (the pic was taken wrong so the slight twist is exaggerated)
Logged

Offline sleek

  • Member
  • Posts: 6,740
Re: How do I make one of these?
« Reply #1 on: December 10, 2017, 05:12:54 am »
Resembles a hoe to me. And any tool can make a weapon so, technical he wouldnt be wrong.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Zuma

  • Member
  • Posts: 4,324
Re: How do I make one of these?
« Reply #2 on: December 10, 2017, 10:35:44 am »
If it had a stone bit I would call it an adz but it's pretty fancy for
a menial tool  like that or a hoe. imo??? ???
Zuma (-P
« Last Edit: December 10, 2017, 10:41:21 am by Zuma »
Logged
If you are a good detective the past is at your feet. The future belongs to Faith.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: How do I make one of these?
« Reply #3 on: December 10, 2017, 11:21:29 am »
Rawhide is good for attaching the working end to this adze or hoe. Wet the rawhide, stretch it and wrap as tight as you can. When the rawhide dries it will draw up and seize the working end to the handle.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Hawkdancer

  • Member
  • Posts: 5,039
Re: How do I make one of these?
« Reply #4 on: December 10, 2017, 12:53:12 pm »
How big is it?  I would think it is a scraper or engraver of some sort.  Can't tell about the shell, mussel, clam, oyster, maybe, depending on where the item is from.
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline JW_Halverson

  • Member
  • Posts: 11,915
Re: How do I make one of these?
« Reply #5 on: December 10, 2017, 01:01:38 pm »
Kinda looks like a gar scale
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline sleek

  • Member
  • Posts: 6,740
Re: How do I make one of these?
« Reply #6 on: December 10, 2017, 01:13:15 pm »
Quote from: JW_Halverson on December 10, 2017, 01:01:38 pm
Kinda looks like a gar scale

Yeah it does. How thick is it?
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,909
  • Eddie Parker
Re: How do I make one of these?
« Reply #7 on: December 10, 2017, 02:41:06 pm »
How big is the whole tool?
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Ryan Jacob

  • Member
  • Posts: 427
Re: How do I make one of these?
« Reply #8 on: December 10, 2017, 04:23:05 pm »
It’s made from a shell not a stone or a scale. It’s about 1.5 feet long, the bit is 3 inches wide
Logged

Offline Zuma

  • Member
  • Posts: 4,324
Re: How do I make one of these?
« Reply #9 on: December 10, 2017, 05:13:12 pm »
An adz is to the right. Credit to Scott Silsby
« Last Edit: December 10, 2017, 05:17:02 pm by Zuma »
Logged
If you are a good detective the past is at your feet. The future belongs to Faith.

Offline Outbackbob48

  • Member
  • Posts: 2,752
Re: How do I make one of these?
« Reply #10 on: December 11, 2017, 09:13:49 am »
Here's a pic of a hoe that I made, used wet rawhide and pine pitch glue for attaching. )P( Bob
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,909
  • Eddie Parker
Re: How do I make one of these?
« Reply #11 on: December 11, 2017, 09:34:01 am »
The reason I asked how big is it, because it kinda looks like the tool the South pacific natives use for pecking in tattoos.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline TimBo

  • Member
  • Posts: 1,047
Re: How do I make one of these?
« Reply #12 on: December 11, 2017, 09:41:29 am »
Quote from: mullet on December 11, 2017, 09:34:01 am
The reason I asked how big is it, because it kinda looks like the tool the South pacific natives use for pecking in tattoos.

OUCH!
Logged

Offline Ryan Jacob

  • Member
  • Posts: 427
Re: How do I make one of these?
« Reply #13 on: December 12, 2017, 06:38:25 am »
Woops, I meant to say 2 inches. Those are some nice tools! A tatooing tool could make sense given the fact I live in the Philippines.
Logged
Pages: [1]
« previous next »