Main Discussion Area > At the Forge
Hay rake teeth to flint strikers
chamookman:
Cool - I'm watchin' (-P ! Thanks - Bob.
Stoner:
Thanks for sharing, waiting & watching patiently. John
KHalverson:
next step I use a chisel to hot cut the striker @ about 6.5 inches
I then forge in taper till about 7 inches long.
next i clamp a small ball pein hammer in my leg vise and use it as a mandrel to start my bend.
Stringman:
Watching
KHalverson:
I finish the first bend and start the 2nd bend same as the first.
second bend gets finished and then I reheat and place in the vise to align the ears.
next I curl the ears.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version