Main Discussion Area > Shooting and Hunting
yet again, i need tips.
El Destructo:
--- Quote from: huntertrapper on March 26, 2008, 11:33:50 pm ---oh really?... the wider the handle the more off it can shoot?that what your sayin yankee..? ??? :)
--- End quote ---
Yep....the wider the Handle the farther the Arrow has to go around to come back on track....unless you have a cut in sight window....thats a different Bird all together.... ca-peche???
recurve shooter:
yeah, i shoot plastic venes. they work fine on recurve. gota buy new arrows i can see. :-\ im looking at the bow, it isnt a bend-in-the-handle, and it is a really simple designe, it has no fancy handle or anything, just a thick(not wide) part. its about 1 1/2 inches wide, maby an inch. it has a 45 lb draw at 28, i draw 30. my relice is good, and im shooting 100 grain field tips (yeah, i know, bad, i shoot modern arrows) what kinda spine should i look for?
El Destructo:
I shoot 50-55 pound Paddle Bows...with an inch and a quarter wide Handle...28 inch draw....and I shoot 31 inch long Hardwood Arrows with 125 grain Points....and they are Spined at 45 pounds...because of the Wide Handle Area that the Arrow has to go around...the Spine has to be lower...at least in my case it always does....you will get more answers here in a Bit...I guarantee you will....
huntertrapper:
oh yeah i know about spine was thinkin you meant baout it would cause bad handshock or throw ya off or something. never mind
El Destructo:
--- Quote from: huntertrapper on March 27, 2008, 12:05:36 am ---oh yeah i know about spine was thinkin you meant baout it would cause bad handshock or throw ya off or something. never mind
--- End quote ---
It will throw you off...if your Arrows are spined too Stiff...and you have a Wide Handle area...theArrow will veer way to the Left...instead of bending around the Handle....
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version