Main Discussion Area > At the Forge
Neck knife
Mesophilic:
Of all the knives I've made, I never got around to doing a neck knife. So I whipped up this little guy and he's really grown on me.
Made from Nitro V steel, which is basically AEB-L stainless razor blade steel with Nitrogen and Vanadium added in. Hollow ground 60-61 HRC, 2.25" cutting edge, 6.75" OAL. Handle is black linen micarta with stabilized lacewood bolsters and red and black spacers (not shown). I wasn't too sure what to do with the sheath since I've never had a neck knife before, so I winged it with a pattern I loosely based on some online images, and turned out pretty happy with the result.
Wearing it is more comfortable than I thought it would be and the blade profile is quite handy.
Mesophilic:
PS
I forgot I had this t-shirt so here's an unobstructed view of the image, will be wearing it to the next 3D league night :D
Hawkdancer:
Great job on the neck knife and sheath! The shots with the arrows are both low! >:D :BB :NN! Hee! Hee! Lol!
Hawkdancer
burchett.donald:
Nice work on the case also...Never tried a necker...
osage outlaw:
Looks like a very useful knife. Great job on it.
Navigation
[0] Message Index
[#] Next page
Go to full version