« previous next »
Pages: [1]

Author Topic: correct some twist?  (Read 1077 times)

0 Members and 1 Guest are viewing this topic.

Offline nsherve

  • Member
  • Posts: 97
correct some twist?
« on: September 18, 2018, 05:58:49 am »
I'm beginning to finish my first recurve. On one of the ends there's a little bit of twist on the recurve that causes the bow to pull a little bit to one side. How would you fix this without having to reset the curve? The bow is made from hickory.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,611
Re: correct some twist?
« Reply #1 on: September 18, 2018, 06:53:00 am »
You may be able to twist the tip in the opposite position but you'll probably need to add heat.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline nsherve

  • Member
  • Posts: 97
Re: correct some twist?
« Reply #2 on: September 18, 2018, 07:48:57 am »
You don't think that'll un-curve the recurve?
Logged

Offline leonwood

  • Member
  • Posts: 762
    • Leonwood Bows
Re: correct some twist?
« Reply #3 on: September 18, 2018, 08:44:30 am »
I guess you added the recurve using a form? Just clamp the recurve in the same form and twist it a little in the opposite direction with clamps and/or wedges and hit it with a heatgun for a minute. That's what I do and that never lets me down.
Logged

Offline nsherve

  • Member
  • Posts: 97
Re: correct some twist?
« Reply #4 on: September 18, 2018, 08:48:56 am »
I don't know why I often don't think of simple things like that...thanks
Logged
Pages: [1]
« previous next »