Main Discussion Area > Arrows

Plastic nocks

(1/2) > >>

Matt1986:
Will 5/16 nocks work on 11/32 shafts

Pat B:
They will but it might net be safe. Just a guess though.

Hawkdancer:
I would say check the fit with lampblack, and see what kind of contact you are getting.  If the taper is the same, you should get a good fit
Hawkdancer

Matt1986:
Thanks everyone. The taper fits good. Ther is a little taper showing were the nock is smaller in diameter but it it making full contact with the nock

JEB:
They will. Some like a smaller nock. If you need some 11/32 I have lots of them and would be willing to give you some. Just need an address.

Navigation

[0] Message Index

[#] Next page