Main Discussion Area > At the Forge
another blacksmith knife
KHalverson:
pappy
most any place that sells wood stove supplies will have stove cement.
check you local hardware.
up here even tractor supply and family farm and home carry it.
Pappy:
Thanks again Kevin, Beau found it on line and I am supposed to have it Thursday, may try it out this weekend. ;)
Pappy
Pappy:
1 more question Kevin, The stuff came in, I was reading about it and even though it doesn't say anything about what I am going to do with it, it does say let set for 24 hours before adding heat, does this apply to what I am going to do with it or is that just brick and such, sorry to be a bother but know you know and I sure don't. ;) :)
Pappy
KHalverson:
pappy
its no bother.
you don't have to let it dry for 24 hours .
I usually just speed dry by holding the knife with tongs and running it in and out of the heat till dry.
most of the time you are only putting it on from 1/16 to 1/8 inch thick.
Pappy:
Thanks much for all your help.
Pappy
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version