Main Discussion Area > Bows
New project
sleek:
Id look into your fades. Draw a line where the splice stops on your handle. I need to see that. Your fades are very long i feel and id bet you can eat into them for more limb length. Now is the time to do it too.. yes, you can head off more set by doing this.
sleek:
From the 3 to 6 inch mark on the pic of your handle, thats stiff, eat into that to get more limb. That would give you an extra 6 inches total. Use that to get your last bit of draw. It will be perfect, and not give you any more set.
.
PatM:
You can almost certainly get a little more bend in the fades and outer fades approaching your v splice. You don't need much.
DC:
The splice ends at the 1" mark on the tape. It's only 2.25" long.
sleek:
Even if you can only get the 6 inch to the 4 inch working that would be good. Id leave your tips alone. Though later you may narrow those shoulders a bit to loose some mass.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version