Main Discussion Area > Bows

New project

<< < (39/67) > >>

DC:

--- Quote from: sleek on March 22, 2019, 09:08:59 am ---From the 3 to 6 inch mark on the pic of your handle, thats stiff, eat into that to get more limb. That would give you an extra 6 inches total. Use that to get your last bit of draw. It will be perfect, and not give you any more set.

Even if you can only get the 6 inch to the 4 inch working that would be good. Id leave your tips alone. Though kater you may narrow those shoiukders a bit to loose some mass.

--- End quote ---
I was steering clear of the fades(like you said) but I guess now is the time. It actually shows better in the picture.

DC:

--- Quote from: sleek on March 22, 2019, 09:12:03 am ---Even if you can only get the 6 inch to the 4 inch working that would be good. Id leave your tips alone. Though later you may narrow those shoulders a bit to loose some mass.

--- End quote ---
I'll be doing quite a bit of skinnying on the whole lever area, from the splice out. I'll glue some splints on the back so I can monitor the bend. But that's later.

sleek:

--- Quote from: DC on March 22, 2019, 09:13:40 am ---
--- Quote from: sleek on March 22, 2019, 09:08:59 am ---From the 3 to 6 inch mark on the pic of your handle, thats stiff, eat into that to get more limb. That would give you an extra 6 inches total. Use that to get your last bit of draw. It will be perfect, and not give you any more set.

Even if you can only get the 6 inch to the 4 inch working that would be good. Id leave your tips alone. Though kater you may narrow those shoiukders a bit to loose some mass.

--- End quote ---
I was steering clear of the fades(like you said) but I guess now is the time. It actually shows better in the picture.

--- End quote ---

Fades are where your last 3 inches should come from. And sometimes its hard to control, thats why i was expressing such strong words of caution.

This bow is coming together almost perfectly. Im so excited, and impressed with your skill and control. Doing a hellova job.

bradsmith2010:
Can u leave draw where it's at...

bradsmith2010:
Can u shoot it through chrono....before extending draw,..ok I'm reading on phone,,,sorry if I missed something,,,if u are to full draw,,,and need more limb,,,,reduce the draw and shoot it,,.maybe u are done,..u have lots of bows....if it shoots good at 26,.,call it good,..

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version