Main Discussion Area > Flintknapping

anotherone bites the dust

(1/2) > >>

1442:
This was the result of too much pressure on the lever with a Solberger jig

1442:
I wish I knew what causes some flutes to be so wavy like that while others come off extremely smooth and flat

bjrogg:
Maybe your getting a little close to the edge there 1442.lol. You sure do push it to the limit sir. Still just impressive even looking at one that bit the dust.
That is a good question.  Maybe something with the way the shockwaves build up?
Bjrogg

1442:
I kept working the big piece and swapped ends on it

1442:
second flute come off a little too thin so the whole thing turned out a little too thick for a folsum,

Navigation

[0] Message Index

[#] Next page