Main Discussion Area > Horn Bows
My horn bow build-a-long
DC:
Thanks for the pictures. In the second picture would the kasan eye be just off the bottom right hand corner?
gorazd:
Yes ...
--- Quote from: DC on July 03, 2019, 12:42:21 pm ---Thanks for the pictures. In the second picture would the kasan eye be just off the bottom right hand corner?
--- End quote ---
gorazd:
laminated siyahs for mongol bow - also from black locust strps ... this time glued with epoxy
DC:
Mine are glued up(epoxy), we'll see tomorrow.
DC:
I've mean meaning to make one of these for a long time. Finally got to it today. I need it to boil the limbs for bending. 37"x 6 1/2"x 3 1/2". Only one seam leaked and I got it fixed first try ;D ;D. It fits nicely across the stove. With an inch or so of water in it there was a 10°f difference in water temp in between the burners. Hopefully with more water in it that will even out. I'll try it in the gas barbecue and see if that works.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version