Main Discussion Area > HowTo's and Build-a-longs

Inspired by Rodney Wright's Firehawk: Osage and Hickory setback/recurve

<< < (4/5) > >>

david w.:
thatis  a FINE bow. i like it

radius:
Thanks!  Did you check out the clip on youtube?

radius:
This one's 35# or so at 28".

I am working on another one, got it nearly tillered today and then POP!  delam!  You should have heard me:  "Aaah!"

The 2nd version is 50# .  I got it to 50# at 17" when it popped.  So I put a ton of epoxy in the gap and squeezed 'er good...tomorrow or the next day I'll get at it.  I want to get it finished by the weekend, because the archery rep from the hunting store is going to take it up to a shoot and show it off.  Can't very well give her one that's going to open up at the handle!  And I want to demonstrate that I can build a bow to order, in short order.

Thanks for the positive support. 

grantmac:
What shoot is going on this weekend? I went to a 3D last weekend and I thought the next was on the 4th of May?
BTW, that bow is looking fantastic! I wish I knew how to splice like that, I'm very length limited.
     Cheers,
             Grant

P.S. Where did you find the Yew?

radius:
Grant, there's a store called Westwind Hardwoods in Sidney near the airport.  It's really close to Slegg's.  I bought a great piece, but they have a lot.  Pretty gnarly stuff, but there's a piece 6 feet long, 3 inches thick, 5 inches wide...you could get enough laminations out of that to build a lot of bows.  All heartwood, but quite a few knots.  That's why i didn't pick it.


I cut over 40 laminations today.  Half are 33 inches long.  Half are 38 inches long.  I still have 3 chunks of wood, good for about 30 more lams 33 inches long. 

You don't have a table saw do you?  Is that why you don't cut your own hickory?

Each 4 laminations is 1 bow.  2 belly, 2 core, and 1 hickory or ash on the back.  So now, I've gotta build risers!  I've got alot on the go here, man!  I better finish the bows i'm working on, and then get back to the yew.

Thanks for the good word.

Navigation

[0] Message Index

[#] Next page

[*] Previous page