Author Topic: White Oak 63" NTN 50#@29"  (Read 1462 times)

0 Members and 1 Guest are viewing this topic.

Offline Nasr

  • Member
  • Posts: 313
White Oak 63" NTN 50#@29"
« on: August 22, 2019, 02:29:58 pm »
 Hello so this bow is a board bow which I do a lot of. It took an inch of set and that was right after shooting and started out with 2 inches of reflex. I haven't finished that handle wanted to shoot it first. I always think about how fast bows can get and I really love discussions like that but when I shot this bow i flinched. But that can also be because I havent shot in a while. Tbh I dont know how I feel about the tiller my eyes are messed up from looking at it all day. Also I am under drawing on that draw pick.

Offline Badger

  • Member
  • Posts: 8,124
Re: White Oak 63" NTN 50#@29"
« Reply #1 on: August 22, 2019, 02:33:56 pm »
  It looks pretty good, you could have gotten a little more bend right out of the fades and reduced set a bit but still looks good as it is. I tend to leave my fades pretty stiff also if I can get away with it.

Offline Nasr

  • Member
  • Posts: 313
Re: White Oak 63" NTN 50#@29"
« Reply #2 on: August 22, 2019, 02:38:20 pm »
you know what Steve I have developed this fear of bending near the fade. Idk why I think its because as I beginner a lot of my bows broke near the fade. Also Its been a while since I made bows so I am kinda rusty and my confidence isn't there yet.

Offline Deerhunter21

  • Member
  • Posts: 2,261
  • What do you despise? By this are you truly known.
Re: White Oak 63" NTN 50#@29"
« Reply #3 on: August 22, 2019, 02:50:36 pm »
It looks great! I agree with badger but still a good bow!
Life before death. Strength before weakness. Journey before destination.

Offline Hamish

  • Member
  • Posts: 1,549
Re: White Oak 63" NTN 50#@29"
« Reply #4 on: August 22, 2019, 06:06:05 pm »
I think you've done a really good job.

Offline Nasr

  • Member
  • Posts: 313
Re: White Oak 63" NTN 50#@29"
« Reply #5 on: August 22, 2019, 06:45:50 pm »
 Thank you all, I will finish this one up and move on to the next one.  :)

Offline sleek

  • Member
  • Posts: 6,740
Re: White Oak 63" NTN 50#@29"
« Reply #6 on: August 22, 2019, 07:58:52 pm »
I like it. I really do. Good job!
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others