Main Discussion Area > Arrows

Another Bareshaft Tuning Post :-)

(1/2) > >>

Knoll:
https://www.youtube.com/watch?v=7rP8Xantd3Q&pbjreload=10

While this is posted on YouTube, there's not much action to it. Rather, several powerpoint-type displays, at least up to the 22:00 minute point which, for me, was the most informative. You hunters may find the entire video to be useful information.

But up to 22:00 minute mark, I found this useful for all shooters . . . . if you want to use or think you may want to use bareshaft tuning to improve arrow flight.

Hope ya find it useful.

WhistlingBadger:
Thanks for sharing.  I'm going to have to watch this.  I guess all this grading can wait...

T

gutpile:
too me... bareshafting woodies of any type is a waste of time.. no two woodies are identically perfect...... once you find the correct spine..get them straight tip to tip ...true up points.. shoot to verify and go hunting... jm2c...gut

bjrogg:
I didn't have time to watch the video Mike. I'm big believer in bareshaft though. It's the best way I know of finding the right spine. Maybe I'll get a chance to watch video tonight.
Bjrogg

Lefty38-55:
To me 3 fletched & 3 bare shafts will tell you all you need ... honestly can’t believe the mess some people make of a really simple process.

And using a spine tester & scale it is toot simple to match arrows to +/- 1 to 2 pounds spine weight and +/- X-grains for weight. I say ‘X’ as I go for +/- 10-grains myself.

Navigation

[0] Message Index

[#] Next page