Main Discussion Area > Horn Bows

Convex scraper

(1/2) > >>

maitus:
How to cut the teeth to convex scrapers so that the teeth will match?

dylanholderman:
make one side first transfer the spacing over to the second one ???

maitus:
Logical.... thank You :D

JNystrom:
Or just use a toothed plane blade and grind to shape. Super quick to sharpen. And actually stays sharp too. I use kunz no.112

maitus:
I'v never seen toothed plane blade.... especially convex blade :)...Any picture?

Navigation

[0] Message Index

[#] Next page