Main Discussion Area > Arrows
Hole in node?
paulc:
A bug hole in a river cane node pretty much means the shaft is no good for an arrow right?
Paul
DC:
I would think so but Korean arrow makers punch a hole right by the node to let steam out. You don't know what the bug did inside though.
Pat B:
When I collect hill cane I discard any that I find with holes in them and typically this hole is 1/8" or less. After they have dried and I separate in like sized groups I find others and break and discard them. Also when I send out any or give them to folks I tell them to do the same. It's just not worth the injuries they and cause.
The holes I'm talking about in the hill cane and likely the cane you are using is insect damage and I don't know the extent of that damage. The holes that the Asian cane arrow makers are putting in the cane is to relieve the internal pressures caused by their heating process so I think this is an apples/oranges situation. It's not the hole necessarily but the internal damage that could be present in the naturally occurring insect damage.
I would definitely discard any raw cane with a hole in it.
DC:
Have you ever split one open to see what's in there?
paulc:
Thanks all for confirming my suspicions...
Navigation
[0] Message Index
[#] Next page
Go to full version