Main Discussion Area > Arrows
Ricardo's arrows
Ricardovanleeuwen:
I do put the stiffest side to the bow, i cut the nocks that way as good as possible, need to to work on that exacly 90degrees of stiffest side cut because sometimes its a bit turned
Ricardovanleeuwen:
I did re Read your message but do i need to get the average of all sides ? I always scraped til there was a stiffest 12 milimeter side
The thing with the wedges is smart, should make it
willie:
working with stiffest side is best. I am going to edit my post above. I like arrows without too much differences between sides, although expecting an arrow to measure exactly the same on each side may be asking too much.
Edited for clarity.
Ricardovanleeuwen:
Ah oke didn't know that, so i should take a shoot witch is all around a Lil bit above spine weight and reduce Them till the stiffest side is on right weight?
bownarra:
yes :)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version