Main Discussion Area > Muzzleloaders

I Ran Out Of Tips

<< < (3/3)

mullet:
Thank you, Steve. I'm getting ready to turn some on the lathe.

Will B:
Those are really nice. I’m gonna make a couple of those. Thanks for the idea!

Pat B:
Eddie, do you have a particular hole diameter and depth for each grain measurement?

mullet:
Pat, with these I just drilled and ground as deep and then as I could go. The next ones and the ones I turn on the lathe I will have it all pre- measured before I drill them.

Navigation

[0] Message Index

[*] Previous page