Main Discussion Area > Arrows

Struggling to figuring out what arrows to use.

(1/1)

Fox:
So i need advice on a arrow set up.. i think i want to use khans tonkin cane shafts but not tottaly sure..  i would like to have  a few broad heads and blunts  and target points..
 So what do all of you use for your shafts, broad heads, target points and blunts? Thanks

-Fox

Todd Mathis:

--- Quote from: Fox on April 26, 2020, 02:05:06 pm ---So i need advice on a arrow set up.. i think i want to use khans tonkin cane shafts but not tottaly sure..  i would like to have  a few broad heads and blunts  and target points..
 So what do all of you use for your shafts, broad heads, target points and blunts? Thanks

-Fox

--- End quote ---
I should probably not comment because I'd love to sell you those shafts.  But you can use outserts as well as glue - on heads, and then there are the black arrows which will accomodate the broad heads.  I am toying with the idea of putting on Judo points or blunts too.  If the spine is a bit higher, the shaft will be a bit thicker, and this is worth trying with the black arrows.  I know I have done this with outsert "screw in" type of set up, but it is butt ugly in my opinion.  Todd at Khansarrows.

Navigation

[0] Message Index