Main Discussion Area > Flintknapping

Need some help with my pressure flaker

<< < (2/2)

mullet:
If you glue it in with epoxy an easy way to get epoxy to release is to put it in the freezer overnight. most of us drill a small hole down to the copper and screw a 1/4" "elen" screw in. That way you can remove easy or adjust it when you need to.

Russ:
i used heat to warm the epoxy up and vinigar to soften the epoxy on the top up then just pulled!

Navigation

[0] Message Index

[*] Previous page