Main Discussion Area > Flight Bows

Bow riser question

<< < (6/6)

willie:
specifying any length would be an addition or change to the rule.
 
If any measurement is to be incorporated into the rule, it should be to clarify what was originally intended. Define and measure the bend.

Selfbowman:
My handles are 9-10”fade to fade. For a fifty pound bow . I have built 100# bows with 10” handles. Just make the add on’s  add after 1 “thickness in the riser or handle. Sorry DC  you might need more yew. Not trying to be smart or hard ass. Most all selfbow rules state one continuous piece of wood or two billets joined in handle. They make no mention of any other laminates at all. But I’m ok with what ever is decided. At that point Its just the rule. Arvin

Navigation

[0] Message Index

[*] Previous page