Main Discussion Area > At the Forge

Pic test

<< < (2/2)

Woody roberts:
Oil didn’t work for me either. I quench in water and I don’t draw back. Just leave them as quenched. Ive made several. Very tough and springy. Harder than a factory Case knife which I like. I was an electrician before I retired and used my work knife to ream conduit with. It will shave a sliver off of EMT without dulling.

Reasonably easy to get an edge on.

Woody roberts:
Here is my work knife. The insert is from a Klein 11 in 1. Phillips on one end, straight on the other and a 1/4” nut driver. Scales are Cherry.

Navigation

[0] Message Index

[*] Previous page