Main Discussion Area > Arrows
Bolts question
Hawkdancer:
I am only slightly smarter than a rock when it comes to cross bows and associated bolts - so this is a multi part question: 1: is there more or less, a standard diameter and length? 2. Will "natural" shafts hold up to a modern cross bow? 3. How is a broadhead point aligned with the rails for safety and accuracy? 4. What sources are available for materials to make bolts?
A friend said he lost one of his bolts " out that away" >:D, and I would like to make him another traditional bolt or a set. Also, I am considering getting qualified to teach Hunter Education here in Nebraska and cross bows seem to be popular and training is required! Btw, minimum legal pull is 125# for big game here. Also, very smokey haze right now - too many fires west of us, come on, wind!
Hawkdancer
stuckinthemud:
Natural materials are fine, medieval crossbows with 1200lb draw weight still used wood shafted bolts
stuckinthemud:
I held off any more answers to allow more knowledgeable folks to answer. If you check an archery supplier you should be able to check out the length bolts are supplied in but I expect there are standard lengths, probably around 14 inches. I imagine broadheads are aligned to lie horizontally
Digital Caveman:
Anyone had luck with traditional crossbows? I made a few proto types, but wasn't committed enough to build a great prod, much less a decent set of bolts. Maybe that's why the thing never shot straight. It was a lot of fun though.
Hawkdancer:
There should be a good number of plans and patterns available! I'm still working on self bows! But with the new saws in the shop wanting to be used, I may start a traditional cross bows bow, depending on availability o f materials.
Hawkdancer
Navigation
[0] Message Index
[#] Next page
Go to full version