Main Discussion Area > 2020 Hunting pics

Hunting with the Hedge 2020-21

<< < (23/52) > >>

HH~:
Some more from kickin around in Idaho last fall.

HH~

HH~:
Hunted up some curvy billets. Just had profiled cut it.

HH~

HH~:
Well, shot "half a holler" yesterday in about 25 degree weather at 3D's. She ran like a champ and spat out a nice score. 3 balls and 18" right of the 110yd 1'x8" target. This might very well be the the bow to pull out when the $ is on the Shoot Down line. New limb performs well and bow has good cast.

May have to bring it back to Buck Holler on 26-28 Feb down in Vanleer, TN.

HH~

Flntknp17:

--- Quote from: Eric Krewson on January 30, 2021, 05:45:25 pm ---That should hold, I have done the same with several bows that ended up with a bad limb, I put a Z splice in them. You have a lot more handle area to contour so your method is the best for the bow you fixed.









--- End quote ---

Eric, what kind of glue is that?

Thanks

Matt

HH~:
Thats Erics rig with the brown glue,  Resorsinol is what it looks like. My S Curve bow has two part epoxy, very similar to EA40. but hardens more and shrinks rate is .0001" when cured.

HH~

Navigation

[0] Message Index

[#] Next page

[*] Previous page