« previous next »
Pages: [1]

Author Topic: First DIY Broadhead  (Read 3334 times)

0 Members and 1 Guest are viewing this topic.

Offline Don W

  • Member
  • Posts: 402
    • diy.timetestedtools.net/
First DIY Broadhead
« on: April 21, 2021, 05:16:40 pm »
I made my first Bow post a few minutes ago, so decided to add an arrow post to. I am now working on a set of maple shafts with wenge foots and making these broadheads for them.

The whole process is here https://www.diy.timetestedtools.net/my-first-diy-broadheads/
« Last Edit: April 21, 2021, 05:56:16 pm by Don W »
Logged
Don

Offline Yooper Bowyer

  • Member
  • Posts: 1,114
  • formerly Tradcraftsman
Re: First DIY Broadhead
« Reply #1 on: April 21, 2021, 05:54:07 pm »
Nice, I think you meant now working :)
Logged

Offline Don W

  • Member
  • Posts: 402
    • diy.timetestedtools.net/
Re: First DIY Broadhead
« Reply #2 on: April 21, 2021, 05:57:04 pm »
 ::)
Logged
Don

Offline Yooper Bowyer

  • Member
  • Posts: 1,114
  • formerly Tradcraftsman
Re: First DIY Broadhead
« Reply #3 on: April 21, 2021, 06:30:39 pm »
Welcome aboard! how did you find this site? Are you more archer, hunter, or bowyer?
Logged

Offline JW_Halverson

  • Member
  • Posts: 11,878
Re: First DIY Broadhead
« Reply #4 on: April 21, 2021, 06:56:59 pm »
Good looking arrows, friend! Nice work.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Don W

  • Member
  • Posts: 402
    • diy.timetestedtools.net/
Re: First DIY Broadhead
« Reply #5 on: April 21, 2021, 06:58:33 pm »
I've been hunting (bow, rifle, small game, deer) my entire life. I'm sure my first arrow had a suction cup on it. I really only got serious about  bow building about a year ago.
Logged
Don

Offline Hawkdancer

  • Member
  • Posts: 5,031
Re: First DIY Broadhead
« Reply #6 on: April 22, 2021, 02:29:39 am »
Welcome aboard!,  A bit of pitch glue and you are rolling!  Nice arrow!
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry
Pages: [1]
« previous next »