Main Discussion Area > English Warbow
Ash warr bow....
Tom_Brone:
you will need to get the right limb working more in the middle (because you will get chrysals at the fades, or a hinge), and the whole bow bending more towards the tips.
Tom
akila:
HI...thks alot for your help....this is exaclty what i wass thincking...trying to get the right limb bending a little more in the middle to avoid a hinge at the fades, and to get to hall limb benidng a little more thru the tips...the bow wass bending just 9 "...i did not pull the bow further then this...ant the wood is pretty dense....0,9 ..tomorow i will put new pictures...
akila:
Hy guys...here is the bow after a little work that i done today.....i dont know what happents, but it seam that its realy tricky to tiller this bow.... :-\....usuly i tiller a bow in a fiew hours, but with this one its a little dificult to tiller.....i have notice a fiew points where i need to do a little more scraping but i realy need your opinion to....thks a lot.
alanesq:
I have drawn an arc on to your picture as I find doing this can help a lot on deciding how the tiller is going and what needs adjusting etc.
I think you just need to get it bending where the green blobs are and you will then be getting pretty close :-)
[attachment deleted by admin]
akila:
HI and thks for your help....right now the bow wass pulled just aboute 14"....im thinking that iff i solve this problems, maybe i can strung the bow and tiller from here on...for the moment the bow is still a warr bow ;D...the scale shows me 99lbs at 13" with long string....so im still on the heavy business...i hope i can tiller this bow right....
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version