Main Discussion Area > Bows

Giant knot hole Osage bow stave

<< < (2/2)

simk:
This is not a giant, but this is how I handle them.  :)

bassman211:
I left plenty of wood on both sides Jawge, and plenty of limb wood yet. Can't post pics. Ryan. Thanks for the the pics. simk.  Nice job. The hole is 1 1/4  inches on the back to a 35 degree angle towards the belly  side. Belly hole is 1 1/2 inches long by a little over an inch wide. Thanks for your help guys. I am shaving it down a little at time while it is drying, so I am OK so far. Their are some  longish limb cracks, but none run off the limbs.

Navigation

[0] Message Index

[*] Previous page