Main Discussion Area > Bows

Large knot hole

(1/1)

Doug509:
This is an interesting Yew stave with a knot from a limb I removed by drilling out the center. The knot is 3/4" with armpits above and below.   I left about the same width in stave wood around the knot and was looking for advice on if I should remove more wood before tillering. It is 12" from the limb tip.

bownarra:
Not that is a knot!
I think it looks about right to start bending.

Selfbowman:
Done one once you could drop a half dollar thru. Cool but shake your teeth loose.🤠🤠🤠

Navigation

[0] Message Index