Main Discussion Area > Bows

New bow started(again, 1/4/2022){ and again 8/10/22}

<< < (6/49) > >>

Pat B:
I got most of the heat bending and straightening done. Will probably be a bit more tweaking to do but not now. I have to say, elm sure reacts well to heat corrections. In a few days I'll recheck the tiller, make adjustments then it will be a while before I start adding the sinew. Here is the end results of the last few days work...

superdav95:
That’s gonna be a nice bow pat. 

Pat B:
Thanks, Dave. I'm looking forward to the rest of the build and seeing how the finished bow comes out.   :OK   :BB

Pat B:
I got off my boney butt and did some more work on this bow. I did a little tillering to get both limbs fairly even for now. Then I clamped the bow to a one limb reflex form to heat treat again and do some lateral adjustment at the same time. I'll try to get to the other limb tomorrow or the next day. Here are a few pics...

bradsmith2010:
lookin great,, beautiful  :)

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version