Main Discussion Area > Bows

To Recurve or Not

<< < (2/2)

Russ:
Go for it dude!



--- Quote from: Piddler on August 14, 2022, 07:35:16 pm ---Photos are quite distorted for some reason. If better ones are needed just let me know.
Piddler

--- End quote ---

also if you want it distorted, click the link under the photo and look at the downloaded photo. it distorts but i wonder why PA distorts the pictures... :OK

bradsmith2010:
sometime the image is a little large, try again in smaller size,

RyanY:
Definitely don’t narrow the width. You need that extra width for your draw weight given the working limb will be short with a rigid handle and recurves. The limbs will be thinner due to the tighter bend radius and you make up for that in the width.

Piddler:
Deer Hunter yes when opening attachment its good.
Bradsmith I shrank the original a couple times just to get them to post. May try JPeg or something next time.
Ryan Y, Not much working limb with recurves for sure but it will bend in the handle quite a bit. I'll narrow the handle section to about 1" or so and keep thinning into the handle area. So semi bendy for sure. I'll add cork or leather to the handle for thickness if needed.
Thanks Fellas

Navigation

[0] Message Index

[*] Previous page