Main Discussion Area > Bows

Question about floor tillering and making target weight with heavier bows

<< < (3/3)

Bruce M:

--- Quote from: Badger on September 08, 2022, 05:28:37 pm ---   You don't have to guess at it at all. When you are tillering the bow and using the long string read it just as if the bow were braced. It does not change much when you brace it. So if you want 120# @30" then pull the bow to 120# each time and just keep correcting the tiller until you get to 28". Once you get there you can brace it and finish tillering. If the bow starts taking too much set on the way you will need to lower your target weight.

--- End quote ---

Thank you for taking the time to type this response, it helped me immensely with my own struggles with tillering.

Navigation

[0] Message Index

[*] Previous page