Main Discussion Area > Bows

advice on wood (black walnut)

(1/2) > >>

simk:
Hi all!

I have the opportunity to get a nice board of black walnut. I have no experience with this wood and its not really cheap, so I'm hesitating a little.

How reliable would you rate this wood as a bellywood in laminated bows? A, B, or C? It sure looks nice but how good is it in compression?

Thanks for advice!

Cheers

BowEd:
As a core wood in my experience.For me around here it's not the best bow wood I've got on it's own but will work.All depends on how far a person wants to stress it.Beautiful looking bow wood when done.
It makes some good arrow shafts too.

simk:
Thanks Ed, I maybe better lookout for other wood. There must be a reason why we dont often see bows made from black walnut.
Low set, good cast and no chrysals is what I'm looking for.
👍

bassman211:
I have made a couple dozen bows from walnut. 95 percent were were made from saplings big enough to get 1 3/4 inches off the fades and, 40 to 45 lb range. 62 inches long for my 25 inches of draw. Knot free wood. It will take set, with less than average cast,and it will belly fret, or any variable  depending on the bow makers skills. I made some real dogs in the beginning. Once I learned the character of the wood I  made some nice bows from it. Easy to work with, takes heat well, and takes more time, and work to turn out a good one. 2nd string wood like birch, but with enough time ,and work can make a nice bow. Both woods are soft hard woods ,so I can't speak for the durability of either wood as a long term hunting bow. Both woods dent easily.

simk:
Thank you bassman for sharing detailed experience 👍 this makes my decision very easy now. 😅

Navigation

[0] Message Index

[#] Next page