Main Discussion Area > Arrows

Bush clover arrow shafts?

(1/2) > >>

Aaron1726:
Hi, this is my first post, so first wanted to say hi.  I've been reading posts on this forum for quite some time and I've learned a ton from you all.

Does anyone have any experience with using bush clover (lespedeza bicolor specifically) for arrow shafts?  I found this stuff locally, the wildlife folks plant it as forage.  The plant itself is just a bunch of straight curved over shoots, so I thought I'd give it a try.  After drying for a few months I took the bark off and to my surprise the wood is lime green/ yellow!  I made a couple into arrows and it seems pretty tough stuff, but curious how it will hold up over time.  Anyway, if anyone has any experience with this material, I'd love to hear your thoughts and experience.  I'm trying to add pics, but can't seem to get that figured out yet :)

Thanks

Aaron1726:
Here is one of the shafts, not sure how well you can see the color.

Aaron1726:
Ok, I think I figured out the pictures, I just have to make them smaller.  Here is the plant

Aaron1726:
And here is one of the shafts next to a holly shoot (top) for comparison of color.  Don't have a spine tester, but they seem to be on par with wild rose for the diameter.  Have a pithy center like the rose too.  But the wood is super hard.  Again, thanks for any thoughts or experience with this material.

bjrogg:
Looks like a winner to me. I’m not familiar with it but from your description and pictures it looks good.

Maybe someone else will give you more information, but if they don’t maybe you can tell us how you like them

Welcome to PA

Bjrogg

Navigation

[0] Message Index

[#] Next page