Main Discussion Area > Bows
Sneak peak.
Selfbowman:
--- Quote from: mmattockx on January 02, 2023, 03:47:17 pm ---
--- Quote from: Selfbowman on January 02, 2023, 11:57:39 am ---Fade to mid limb.
--- End quote ---
Now that's interesting. The straight width taper pyramid profile will overstress the outer mid part of the limb (~2/3 of the way from fade to tip) if the thickness is kept constant as most people say to do with the pyramid shape. To maintain constant thickness from fade to tip the limb sides need to be curved out a bit from straight to keep the strain the same all along.
Did you want to go with the same 1-1/8" width out of the fades or try a bit wider this time?
Mark
--- End quote ---
Two inches from handle 11/16”mid limb 9-1/6. 2” from tip 9-16”
Selfbowman:
The new handle glue up worked out fine.
Selfbowman:
I peeled a bit more weight off this bow cause I like shooting it. This bow took more set than sneak peek two the wiggle bow. I think it failed in tension due to the trapping. Can’t prove it though. Arvin
Bob Barnes:
This should be your 3D bow! :OK
Selfbowman:
Here they are together
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version