Main Discussion Area > Bows
Sneak peek 2
Bob Barnes:
Mark, Arvin's bows are typically 69" long.
Selfbowman:
Here is bigger piece.113.85 mm x 38.73x21.09. 82 g add the 1x1 without the rounded edges 98g
Selfbowman:
--- Quote from: Selfbowman on January 06, 2023, 01:54:13 pm ---Correction 41#@21” That’s with string on no set.
[/quote
This Mark
--- End quote ---
Selfbowman:
Pic or this bow compared to my wide pyramid selfbow that set records. I traced my wide pyramid at brace. Cut out the plywood and screwed it to my caul, the bow took little set. This bow is close to the same profile. It might be interesting to see if I can duplicate the strung profile and get the same draw weight. This bow is 69”vs 67” of the old bow. I might have to build a 67” also.
Selfbowman:
Where you see the tracing behind the bow is where I will remove the mass. Ok Alan and Mark from the chart would this make since?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version