Main Discussion Area > Bows
"Not Wide" Red Oak Board Bow Not for BOM
George Tsoukalas:
Here is a photo at brace. The brace height is 7". The bow is 66.5" long and 45# at 25". The bow is 1" wide. I'll show full draw on the next post. Jawge
George Tsoukalas:
After 30 years of bow making, making bows from all the usual bow woods (and some not so usual), and making bows from boards and log staves, I still get a thrill when I hit my draw length on my rope and pulley.
The set is about 1.5" so far.
This has been quite a journey.
Jawge
Bob Barnes:
thank you for the posts... it looks like you still have it... :OK
bentstick54:
Doesn’t get any better than that. Thanks for sharing.
bradsmith2010:
great work,, congrats,, :)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version