Main Discussion Area > Arrows

Keeping field points on?

(1/2) > >>

ravenbeak:
Hey there.

Looking for some help.  I have never been able to get steel glue on points to stay well on my arrow shafting, they always come off.  Tried cleaning the heads with acetone and grinding with a brush.  Tried all types of adhesives from melt on to epoxy but nothing seems to work great with the steel points.
Being said.  I have been able to get the glue on brass points to stick well, so thinking it is something to do with the steel field points.

So question is what what are you guys using?  Open to suggestions!

Thanks
Jamie

Little John:
I use Ferrell tite and ha e never had any problem. Get it from archery supellier ike three rivers.

osage outlaw:
I use acetone on a q-tip to clean the inside of the point thoroughly.   That seemed to help mine stay on better.

Buckskinner:
I use pine pitch glue and never had a problem. 

PEARL DRUMS:
Take some 60-80 grit sandpaper and roll it into a cone shape. Stuff it in the point and twist it around until the inside shines. Glue them on with glue sticks of your choice.

Navigation

[0] Message Index

[#] Next page