Main Discussion Area > Bows

How would you do a blended multi-tone finish like this?

<< < (2/2)

bradsmith2010:
let us know how it turns out,,good luck on your project,, :D

superdav95:
Same here.  Leather dye feibings. Alcohol based.  Start with you lightest Color first then use a heat gun on low setting the dry it well before moving to your next darkest Color and so on. 

Here’s a pic of one I did last year this way. 

boxerboxer:

--- Quote from: superdav95 on March 22, 2023, 12:40:09 pm ---Same here.  Leather dye feibings. Alcohol based.  Start with you lightest Color first then use a heat gun on low setting the dry it well before moving to your next darkest Color and so on. 

Here’s a pic of one I did last year this way.

--- End quote ---

Did you run the yellow all the way under everything, then red over the top, then black over that? Or does the yellow just overlap with the red a bit? I would imagine you could do either, just with slightly different results.

Eric Krewson:
I put on several coats of leather dye, drying each coat with a heat gun, then I rub the areas that I want to be light with a green scotch bright pad.



   

Navigation

[0] Message Index

[*] Previous page