Main Discussion Area > Bows
Arvins Design - 68"ttt - 45@28" - heattreated elm
simk:
Thanx guys, its my pleasure (-S
Good quality ash, strongly heattreated will work too Muskyman.
Nocks are transparent cow horn Aaron.
Aksel, I just had to measure, its 1 1/2" wide at the fades. To be honest, apart of the length of 68" I dont know anything about Arvins bows, no measurments or proportions. I just saw a few pics and eyballed my own Arvin-bow. Dunno how accurate my copy is but I did and do still like it. I just call it Arvins design because he is doing it all the time 🤗 interesting point is, i had been reading in different books about the optimal length of a wooden bow being 68"...until I tried I was convinced that this was too long for a real quick stick.
Cheers
superdav95:
--- Quote from: Aksel on July 03, 2023, 11:11:12 am ---Nice bow, how wide is the bow? And what´s Arvins Design specifically?
--- End quote ---
Aksel. Arvin/selfbowman has many posts dedicated to his builds and one could gain a lot of good info just as a place to start for some specific dimensions and such. Have a peek at his more recent build posts and you’ll get a good idea. Lots of guys on here with good info on their builds. Reach out to them and I’m sure they would be willing to share some info.
bassman211:
If you get right it makes a great bow, Nice work.
GlisGlis:
Great bow and awesome countryside :OK
Kidder:
That’s a fine bow Simk. I like the subtle curves.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version