Main Discussion Area > Bows
Propeller stave going straight.
Selfbowman:
What propeller?
Selfbowman:
Heat session 3 . Ive smoothed up the rough blank . Got the blank about the same thickness. I will heat and let the bow limb float to its desired place between the plywood shims. I’ve found at this stage if everything is even in thickness the grain will almost straighten its self., I just shim as I go here.
Selfbowman:
Heat session 3 complete.
Selfbowman:
How do y’all measure a non bend handle? This is how I do it.9”
Selfbowman:
Not perfect but good.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version