Main Discussion Area > Flintknapping

Bopper preference

(1/2) > >>

Muskyman:
Looking to get some boppers. Any recommendations on sizes. Also do you prefer solid copper or lead filled heads. I saw a kit with 5 different sizes that comes in solid or lead filled. 3/4 to 11/2 inch heads. I had made some but I don’t think I put enough lead in them. Also my biggest one is deforming and not looking good at all. I think it was a 1 inch copper end cap. 
Any thoughts appreciated.
Thanks

paulc:
I made some boppers after a visit to the hardware store.  Copper pipe caps mounted on either pvc or a branch.  It works pretty well and cheaper than buying premade...one more rabbit hole to go down as well.  Add weight? How much weight?  pvc vs branch, lenght of lever....fwiw  Paul

Muskyman:
That’s what I used as well. Tried to round out the caps. About 2 ozs of lead in the biggest one. Then  epoxied them to a hardwood dowel. The one inch is kind of deformed now. 3/4 inch one is fine.
I know it’s operator error and not the tool but, I’ll probably buy some. Also made pressure flaker and a notching tool, and a ishi stick. Not having much luck with the indirect stuff but getting a decent flake now and then.

Allyn T:
I bought the solid copper head set myself but I work a lot of raw rock and that tears up the lead boppers faster. Whichever you pick just stick with it till your proficient, switching between types will mess ya up in the beginning

Muskyman:
Thanks Allyn, I’m leaning toward the lead filled ones right now. Might just get a couple sizes of them for now. Not sure yet. Might just get a set. Might be cheaper in the long run. Need some rock to whack on once I get them though.

Navigation

[0] Message Index

[#] Next page