Main Discussion Area > Bows

Cut to much out at fade.

<< < (2/2)

Badger:
 There is an easy way to find out if you cut too much out and you could even figure out the correction if you don't mind cutting this bow shorter and building another one for the 70" bow. Put a slightly long string on it and gradually start pulling it to fid how much weight you can put on it before it bends too much. If you can make it to 45# you are good to go.

Jim Davis:
Me too. 

Selfbowman:
Thanks guys I new I was pushing the envelope when I over cut it. I have room to move the fade back another 1-4to1/2”also. This lady is tall! And can shoot a flight bow. I don’t know how many records but 6 in one year!

Navigation

[0] Message Index

[*] Previous page