Main Discussion Area > Bows

Osage ELB attempt, am I on the right track? Finished bow"Lox" 95llbs@30"

<< < (5/10) > >>

Ruddy Darter:
Yes TimBo, that area was looking a little squareish in profile on re-examination so I've really rounded this area as well as most of the lower limb to, I'm looking forward to seeing how it is after doing this, I feel ill have a better starting point, but happy so far.
 R.D.

 Here's a vid, I've got it moving a little better and I can take some more off inner top limb, the limbs are balanced on the centre.n I'll see what i can get away without heat straightening.
https://youtu.be/ydPxndyLmoU?si=7NuQ2BPkURbWJS9c

Ruddy Darter:
Managed to get to a low brace, it's been a struggle to get the top limb moving evenly, but as good as I can get it, I'm going to hit the mid/outer bottom limb (left in pic) a bit more and then i will pull to a target weight  on the tiller tree. Hopefully looking sort of ok. :-\,
 R.D.
https://youtu.be/WSER3DIdRPs?si=DxZ3SkKZISYyj5b6

Pat B:
Getting the bottom(left) limb to bend a bit more and I'd say you are good to go.  :OK Gonna be a nice bow.

Pappy:
Yep looking pretty good for sure, you are coming along. :)
 Pappy

Ruddy Darter:
Great stuff, thank you very much Pat B, Pappy.
..just taken some off the bottom limb and will see how that is looking sometime tomorrow, and I hope to have the majority done over the weekend,  :)
 R.D.

Navigation

[0] Message Index

[#] Next page

[*] Previous page