Main Discussion Area > Bows
Bendy Osage Tiller Check
Jake Spoon:
Ok! Scraped, sanded, and shot it 20 times @ 20" draw. Then repeated, removed the string and took another picture of the side profile.
Right limb in my opinion still looks a little flat and the left limb is still stiff on the mid/inner sections. I will keep working at it slowly.
superdav95:
its looking very good. any changes now are very minor. well done! The inner on the left could use a tiny bit now to my eye. the right limb looks great now. without seeing bow in person its hard to know for certain if the bottom is the left side then i might be inclined to just leave it a little stiffer inner on the left. just my thoughts. either way well done.
Jake Spoon:
Thank you for the feedback superdav!
Here she is pulling 38# at 28."
Muskyman:
I think it’s looking great Jake.
Zugul:
it took very little set, I'd call it a success!
Navigation
[0] Message Index
[*] Previous page
Go to full version