Main Discussion Area > Bows

Is it normal/ what do I do about it?

<< < (3/3)

Selfbowman:
I’ve done all the above .🤠 still get set.🤠🤠 my long string pulled to 20 inches on my vertical measurement gets me close to brace. On a fifty pound bow 67” long 8-10” handle I’m pulling about 20-30 pounds. If bending even I brace. If still bending even I finish the tiller. Usually pretty close at that point. But I’ve done it a lot of other ways.

willie:

--- Quote from: Selfbowman on July 18, 2024, 05:35:51 pm ---I’ve done all the above .🤠 still get set.🤠🤠 my long string pulled to 20 inches on my vertical measurement gets me close to brace. On a fifty pound bow 67” long 8-10” handle I’m pulling about 20-30 pounds. If bending even I brace. If still bending even I finish the tiller. Usually pretty close at that point. But I’ve done it a lot of other ways.

--- End quote ---

thanks for sharing your method, Arvin.  I assume you exercise quite a bit getting to the 20"?

BTW, you say pull to 20" "on your verticle measurement"
how many inches on your verticle measurement is the hook on the longstring before you make the pull?
ie how much droop do you start with?

Navigation

[0] Message Index

[*] Previous page