Main Discussion Area > Bows

Hi tech redneck flight bow.

<< < (7/24) > >>

Pappy:
Looking good Arvin, should be a smooth shooter. :)
 Pappy

Selfbowman:
Thin it out one more time and heat it again and we should have profile .

Jim Davis:
Hope I remember  to  watch this all  the way to  the test results. A computer's output is only as  good as its input.

Selfbowman:
Jim you know me. I don’t like computers . But I’m not a engineer. The design depends on the wood test to be even close. That’s why we are testing scraps from The stave . This is the only way I know to get close to the design. Then It depends on the builder. I also think that I need to ease into the tiller weight. I’m going wider and thicker than the design slightly and work toward the design. The last one I did it came out 10# light. But the sample from the stave was not tested. So we will see how the engineer and the builder does on this One.

JW_Halverson:
Just gonna drop a throwaway comment here so that this comes up regularly in my new replies listing. I wanna see how this comes along, as well as the finished product.

Crack on, brother.

Navigation

[0] Message Index

[#] Next page

[*] Previous page