Main Discussion Area > Bows

Arvin and me

<< < (9/9)

sleek:
Did any of that 1/2" come back after being unstrung?

bjrogg:
That 1/2” is difference from what I started with before any bending and what it has now. It might have a 1/4” immediately after unstrung that comes back

Bjrogg

sleek:

--- Quote from: bjrogg on February 11, 2025, 11:34:10 am ---That 1/2” is difference from what I started with before any bending of what it has now. It might have a 1/4” of immediately after unstrung that comes back

Bjrogg

--- End quote ---

So 1/4 is set, the other 1/4 is likely reflex that pulled out. That's damn good. Is this a bow i ran numbers on for you guys to check its surface area as draw weight?

bjrogg:

--- Quote from: sleek on February 11, 2025, 11:40:57 am ---
--- Quote from: bjrogg on February 11, 2025, 11:34:10 am ---That 1/2” is difference from what I started with before any bending of what it has now. It might have a 1/4” of immediately after unstrung that comes back

Bjrogg

--- End quote ---

So 1/4 is set, the other 1/4 is likely reflex that pulled out. That's damn good. Is this a bow i ran numbers on for you guys to check its surface area as draw weight?

--- End quote ---




Sorry I can’t tell you that Sleek but I did put the measurements every four inches of both width and thickness. It’s posted on this thread. There are two different bows that I gave dimensions for.

It would be the first one (Arvin n Me)

Bjrogg

Navigation

[0] Message Index

[*] Previous page