Main Discussion Area > HowTo's and Build-a-longs

First try at no horn asiatic - build along

<< < (3/3)

jameswoodmot:
Uploading pics is pretty painful this morning!

As you can see we aren’t quite in line. I am not one for putting in the effort marking things out. I trust my eye and I leave things over sized so I can bring them in to shape and size later. Always best to leave room for error and design change!

As you can see we aren’t quite in line. I am not one for putting in the effort marking things out. I trust my eye and I leave things over sized so I can bring them in to shape and size later. Always best to leave room for error and design change!

medicinewheel:
Nice project! Lokking foreward to see this one finished.
Hope the cherry wood can stand the compression!

jameswoodmot:

--- Quote from: medicinewheel on July 08, 2025, 06:43:34 am ---Nice project! Lokking foreward to see this one finished.
Hope the cherry wood can stand the compression!

--- End quote ---

I’m hearing a lot of mixed ideas about sinew increasing compression forces and also relieving compression by moving the neutral plane towards the back.
I’m sure it’s not a black and white answer and I suspect it can do both or one or the other depending on its application.

I’m thinking a couple of layers to start and see how I’m feeling

Navigation

[0] Message Index

[*] Previous page